FBR registered · verify Manufactured in Sialkot, Pakistan

Guide

How to Prepare Artwork for Sublimation and Embroidery

Written by Abdul Hadi · last reviewed

Send your logos and designs as vector files if you can, with text converted to outlines, your colors listed and your placement marked on a simple drawing. If you only have a PNG or JPG, send the largest, clearest version, and say so in your brief so it can be checked. A clean file means a faster, more accurate mock-up.

Key takeaway. Vector files, outlined text, named colors, sharp images, a placement drawing and clear file names. Get those six right and most artwork delays disappear.

Ready to send your design? Send your brief and upload your artwork. A sample is ready in 8–10 working days once specs and artwork are approved and payment is received.

What is a vector file and why do manufacturers ask for one?

A vector file describes a design as lines, curves and flat colors. You can enlarge it from a sleeve badge to a full back panel and the edges stay sharp. A raster file (PNG, JPG) is a grid of pixels. Enlarge it too far and it looks soft or blocky.

Vector files matter for two reasons. Embroidery has to be converted into a stitch path, and clean shapes make that conversion more accurate. Sublimation prints at full size across large panels, where soft edges show. If you do not have a vector file, ask whoever designed the logo or the original supplier, since they usually hold one.

Which file types can you send us?

The quote form accepts up to 3 files of 10 MB each, in these formats: PDF, PNG, JPG, AI, EPS, SVG, ZIP, Word, Excel and CSV. You can also paste a link to a shared folder instead of uploading.

What each file type is best for
File typeUse it for
AI, EPS, SVGLogos and designs. Vector, best choice.
PDFVector artwork saved as a PDF, or a full design layout to look at.
PNG, JPGPhotographs, reference images and logos with no vector source.
ZIPBundling several files. Note the upload limit.
Excel, CSV, WordRosters, names, numbers and size runs.

If you are unsure what you have, upload what you can find. Say which file is the main design and which are references.

How do you convert text to outlines?

Fonts are not stored inside most design files. If the factory does not have your font, the text will be replaced with a different one. Converting text to outlines turns the letters into shapes, so they look the same on every computer.

  1. Finish and check the spelling of all text, including names and sponsor wording.
  2. Save a copy of the working file, so you can edit the text later.
  3. In your design program, select all text and use the "create outlines" or "convert to curves" command.
  4. Save or export the outlined copy as AI, EPS, SVG or PDF.

If you do not use design software, send the font file or name the font, or send a clear PDF and say which text is final.

How do you choose and communicate colors?

Screens, printers and fabrics show color differently, so do not rely on how a color looks on your monitor. Use these habits:

  • List every color in the design and say where it is used, for example "navy on the body, white on the collar".
  • Give a color reference code for each key color if you have one, such as a brand guideline value. Say which system it is from.
  • Send a physical item, or a clear photo in daylight, for any color that must match something you already own.
  • Keep the number of colors down when you can. Clean color blocks reproduce more predictably than subtle gradients.
  • Check the color on the mock-up and again on the sample. Mock-ups are approved before cutting or decorating, and the sample is your last check before bulk.

Our glossary explains terms such as colorway and lab dip, which you may hear when matching colors.

What resolution is enough for photographic images?

Photographs and textures cannot be vector files. For these, size matters more than anything. A common rule of thumb is that an image should be about 300 pixels per inch at the size it will be printed. A photograph that looks fine on a phone may be far too small to print across a shirt front.

Before sending, check the image dimensions. Do not enlarge a small image in an editor to hit a bigger number, because that adds pixels without adding detail. Send the original file straight from the camera or the source, not a screenshot or a social media download. If the image is small, tell us and ask whether it will work at the size you want.

How do you place logos and sponsor marks?

Words are easy to misread, and a picture is not. A simple placement drawing saves several rounds of emails.

  • Use a front and back outline of the garment. A rough sketch or a screenshot of a similar shirt is enough.
  • Mark each logo with its position and size, measured from a fixed point such as the collar seam or the sleeve seam.
  • State the size of each element, in centimeters or inches, and say which.
  • Say which sponsor goes where, and which is the priority if space is tight.
  • For sublimation, tell us if a design should run across seams or stop at them.
  • If your league sets rules for logo size, placement or color, check them first. Our kit rules pages give a starting point, and the kit order checklist lists what to settle before you order.

You approve a mock-up before cutting or decorating, so any adjustment at this stage costs nothing in fabric.

How big should numbers and names be?

The right size depends on the sport and your league, so check your competition's kit rules before you decide. As a general principle, back numbers must be readable from a distance, which means a strong contrast with the shirt color and a clean, simple typeface. Names in small, thin or script lettering often become hard to read once printed or stitched.

Give the sizes you want in centimeters or inches rather than "large" or "small". Our guide to names and numbers on team kit covers the choice of method and how to supply a roster without errors.

How do you name and send the files?

A tidy folder saves time and prevents the wrong logo going on the wrong shirt.

  • Use descriptive names, for example club-crest-main.ai and sponsor-front-white.eps.
  • Add a version if you update a file, such as -v2, and delete or mark old ones.
  • Put the roster in its own file, and keep names and numbers in separate columns.
  • Add a one-page note saying which file is final, the quantity, the colors and the placement.
  • Upload with your quote request, or paste a link to a shared folder if you have more than three files.

If your design is not yet final, still send what you have. Say which parts are still open so they can be settled at the mock-up stage. For a full spec, see our guide to creating a tech pack, and for how sublimation works, see what sublimation printing is.

Common Questions

What file format is best for a custom jersey design?

A vector file, such as AI, EPS, SVG or a vector PDF, is best because it can be resized without losing sharpness. If you only have a PNG or JPG, send the largest, clearest version you have.

What if I only have a low-resolution logo?

Send it anyway, and say it is low resolution so it can be checked. A low-resolution image enlarged to fit a chest or sleeve will look soft, so it is better to find the original file or have the logo redrawn.

Can I send a hand drawing or a sketch?

Yes, as a starting point. Add a clear photo or scan, the colors, the sizes and where each element goes. Be aware that a sketch usually has to be redrawn as a clean file before production, and mock-ups are approved before cutting or decorating.

How many files can I upload and how large can they be?

The quote form accepts up to 3 files of 10 MB each (PDF, PNG, JPG, AI, EPS, SVG, ZIP, Word, Excel or CSV), or a link. For more or larger files, send a link to a shared folder, or zip them.

Get a Quote

Sources

Planning an order?

Send your brief and we will reply with pricing and a sample timeline.

Sample 8–10 working daysBulk 15–18 working daysTeam kits from 15, other styles 20 per style per colorA quote is not an order