The number of samples you need depends on how new the garment is. Fashion guides list up to four stages, from a first prototype to a sample taken from production, and advise planning at least two rounds of samples for a new product. A team kit made to a clear spec with your own artwork is a smaller job, and often needs one sample that you approve before bulk. This guide explains each stage, what to check in it and how to decide how many you need.
Key takeaway. A new pattern needs more samples than a standard cut with your logo on it. Whatever the count, the sample you approve in writing becomes the standard for the whole order, so check it against your spec before you say yes, and send all changes in one message.
Ready to start with one sample? Send your brief and get a quote. A sample is ready in 8–10 working days.
What are the sample stages?
Industry vocabulary varies, and factories call the same thing by different names. One widely read description from the StartUp FASHION site sets out the usual sequence, shown below with what each stage is for. Treat it as a map, not a rule.
| Stage | Question it answers | What to check |
|---|---|---|
| Prototype | Can the factory build this idea? | Overall design, function, closures. Sometimes made in a cheaper fabric. |
| Fit sample | Does it fit and feel right? | Measurements against the spec and tolerance, fit on a body, construction. Best made in production fabric. |
| Pre-production sample | Is this exactly what we will make in bulk? | Production fabric and trims, branded labels, changes from the fit round. Approval locks the design. |
| Top-of-production sample | Did bulk match the approved sample? | Taken from the production run, a reference for future orders. |
Two related terms appear in our glossary: a pre-production sample, which is made to your specification before bulk so you can check fabric, fit, color and branding, and a lab dip, a small dyed swatch to check a color match before fabric is dyed. Sports kit adds one more question: does the print match your artwork? Always compare the sample with the mock-up you approved.
How many samples does your order need?
There is no universal number. The more you leave to the factory, the more rounds it takes. This table is general guidance for buyers, not a statement of how any one factory works.
| Your situation | What to expect |
|---|---|
| Standard cut, your logo and colors (a typical club kit) | One sample to check fit, print and color, then approve. See our page for clubs. |
| Copying a garment you already own and like | One or two. A reference garment is a strong starting point. |
| A new pattern for your own brand | Plan for at least two, as the fashion guides advise, and budget time for both. |
| Fit-critical garments, such as compression or leggings | Expect more fit attention. Ask about a second sample before bulk. |
| A wide size range or children's sizes | Ask whether a second size can be checked before bulk, so grading is verified. |
A tight brief cuts rounds more than anything else. A tech pack, a clear artwork file and color references remove most of the guesswork. Our sample order checklist lists what to prepare, and our tech pack template is free to use.
How does a sample work with us?
Our process is sample first, and bulk production starts only after you approve it. In short:
- You send the brief: product, quantity, colors, artwork and branding. A tech pack, a reference image or a garment you like is enough to start.
- We reply with a quote and a sample timeline. A sample can be a single paid piece.
- The sample is ready in 8–10 working days after specs and artwork are approved and payment is received.
- You check it and approve, or send your changes. Bulk then takes 15–18 working days after approval.
So a single-round order is about 23 to 28 working days of production, counting the sample and the bulk run, before shipping and before the days you take to review. Every extra round adds another sample period and courier time each way. Shipping is extra and quoted with the sample. Our timeline guide shows how to work backward from a deadline.
On the cost side, the sample fee is credited against a first bulk order of 50 or more pieces, claimed when you place the order. That credit does not apply to a smaller bulk order, and sample fees are non-refundable, so confirm the brief before you pay. The terms are on our samples page, and the payment steps are in our guide to paying a manufacturer safely.
What can a sample not tell you?
A sample proves the design and the build. It does not prove that every bulk piece is identical, because fabric comes in batches and dye lots differ slightly. Our returns policy treats small shade variation between dye lots as normal, and our quality control page lists the checks done before cutting, during production and on every finished piece. Neither replaces your own check of the sample, so write down the color references and measurements you approve.
You can test the sample yourself. Measure it flat before and after one wash, and compare it with the spec. Our guide on how to check garment quality before you approve a sample walks through it. If a buyer or lab asks for a named test, two standards are widely referenced: ISO 6330:2021 sets out domestic washing and drying procedures for textile testing, and ISO 105-C06:2010 sets out methods for color fastness to domestic and commercial laundering. Both say that test choices, such as machine and detergent, can affect results, so ask your lab which procedure applies before you quote a result. We do not publish AQL levels or test figures, and third-party inspection is welcome.
How should you approve, or reject, a sample?
- Check against your spec, not against memory. Measure each point and note the tolerance you agreed.
- Judge color in daylight against your reference, because screens differ.
- Send one message. List every change, with a photo beside a ruler, instead of a trickle of emails.
- Approve in writing. Say what you approve, so the record shows what bulk is compared with.
- Keep the approved sample. It is your reference for this order and for any reorder.
If you are launching a brand rather than ordering team kit, the same steps sit inside the bigger plan in our private label checklist and our page for startup brands. Questions to ask any manufacturer before paying for a sample are in our 12-question guide.
The stage names in this guide are common industry terms, not a Nyxlete promise of any particular number of rounds. Ask us what your own order needs in your quote.
Common Questions
Can I skip the sample and go straight to bulk?
Our process is sample first: every order starts with a sample, and bulk production starts only after you approve it. The sample is what protects both sides, because the bulk order is compared with what you signed off.
Can a sample be a single piece?
Yes. A sample can be a single paid piece. The sample fee is credited against a first bulk order of 50 or more pieces, claimed when you place the order. See our samples page for the full terms.
Will the bulk order look exactly like the sample?
It should match what you approved in construction, print position and fabric. Small shade differences between dye lots are treated as normal, as our returns policy sets out, so note the color references you care about in writing before you approve.
What if I want changes after seeing the sample?
Send them in one message with photos, quoting your spec or mock-up, and do not approve the sample until the changes are confirmed. Ask for a corrected sample or written confirmation of the fix before bulk starts.
Get a QuoteSources
- StartUp FASHION: Fashion Sampling Process 101, on prototype, fit, pre-production and top-of-production samples, and on planning at least two rounds for a new product. A fashion-industry guide, so a map of common practice rather than a rule. Checked 11 Nov 2026.
- ISO 6330:2021: Domestic washing and drying procedures for textile testing, on washing procedures and the note that machine, detergent and dryer type can affect results. Checked 11 Nov 2026.
- ISO 105-C06:2010: Colour fastness to domestic and commercial laundering, on single and multiple laundering tests. Confirmed current in 2026 on the ISO page. Checked 11 Nov 2026.
- Nyxlete samples page, quality control page and returns policy, on sample terms, the checks we make and dye-lot variation.