Nyxlete · free to use
Sportswear fabric selection guide
Five common fabrics at a glance
General characteristics. Real fabrics vary by weight, yarn and finish, so treat this as a starting point.
| Fabric | Typical uses | How it behaves | Decoration |
|---|---|---|---|
| Polyester (knit jersey, interlock) | Match jerseys, training tees, team kits, shorts | Light, dries quickly, holds its shape and color, does not absorb much moisture. | Sublimation works on polyester and goes right through the fiber. Embroidery and heat transfer also work. |
| Poly-spandex (polyester with elastane) | Compression wear, leggings, sports bras, cycling and base layers | Stretches in several directions and recovers. Needs the right weight and fit to stay opaque when stretched. | Sublimation works on the polyester content. Embroidery needs care because it can limit stretch. |
| Cotton (and cotton-rich blends) | T-shirts, casual tees, lounge and streetwear | Soft, breathable, absorbs moisture and dries slowly. Can shrink and lose shape if the blend and finish are not controlled. | Screen print, DTF and embroidery suit it. Sublimation does not work on pure cotton. |
| Fleece (brushed-back polyester or cotton blends) | Hoodies, sweatshirts, tracksuits, warm-up tops | Warm and soft on the inside, heavier than jersey. Cotton-rich fleece is softer, polyester-rich fleece dries faster. | Embroidery and print suit it. Sublimation suits polyester-rich fleece in light colors. |
| Mesh (open knit) | Basketball jerseys and shorts, linings, vents and side panels | Open structure lets air through and sheds heat. Very light, so it is often used as a panel next to a denser fabric. | Sublimation suits polyester mesh. Heavy embroidery is rarely suitable on open mesh. |
Choosing in four steps
- Start with the use. A match shirt needs airflow and quick drying. A hoodie needs warmth and a soft inside. A legging needs stretch and recovery.
- Check the decoration. Full-color all-over designs need sublimation on polyester. A cotton tee suits screen print or DTF. See the decoration comparison.
- Choose the weight. Heavier is not automatically better. Weight in GSM is a guide to the fabric, not a measure of quality. See fabric weights explained.
- Confirm on a sample. Hold one layer to the light, stretch it, check the print and wash a spare piece. Do this before you approve bulk.
What to tell a manufacturer
The more you can say about the fabric, the closer the first sample is.
- A reference garment or swatch, or a photo of a garment you like the feel of.
- The weight you are aiming for, in GSM, if you know it.
- The stretch you need: none, two-way or four-way.
- The decoration you plan, because it limits the fabric.
- The conditions the garment will face: hot weather, cold weather, frequent washing, contact sport.
Go deeper
- Choosing fabric for custom sportswear: match fabric to sport, season and decoration.
- Fabric weights and GSM explained: what the number tells you.
- Running wear fabrics explained: what matters for running.
- Rugby kit fabric: what works for a hard-wearing kit.