FBR registered · verify Manufactured in Sialkot, Pakistan

Guide

How to Wash Sublimated Jerseys and Team Kit So the Colors Last

Written by Abdul Hadi · last reviewed

Wash polyester team kit inside out, in cool water on a gentle cycle, with no bleach and no fabric softener, then dry it flat or on a line. That is general advice for most sublimated kit, and your garment's own care label always comes first.

Key takeaway. Cool, inside out, gentle, no bleach or softener, and air dry. Take extra care with numbers, badges and transfers. This is general guidance for polyester kit, so follow the care label on your own garments.

Planning a new kit? Send your brief and get a quote. A sample is ready in 8–10 working days.

What does the care label tell you?

The care label is the maker's instruction for that exact garment, so it overrides any general advice, including this page. Care symbols follow common systems such as the international ISO 3758 code, and the US uses its own ASTM standard, with similar pictograms.

The five basic symbols are easy to learn:

  • Wash tub: how to wash, and the maximum temperature.
  • Triangle: whether bleach is allowed.
  • Square: how to dry, by tumble or naturally.
  • Iron: whether to iron. Each dot is a higher maximum temperature.
  • Circle: professional cleaning.

A cross through a symbol means do not do it. If a label is missing or unreadable, use the gentlest option described below.

How should you wash a polyester kit?

  1. Wash soon after use. Do not leave a damp kit in a bag overnight.
  2. Turn it inside out. This protects prints, badges and numbers from rubbing.
  3. Close zips and Velcro. Hooks catch on fabric and pull threads.
  4. Choose a cool, gentle cycle. Wash similar colors together, and a new kit on its own for the first few washes.
  5. Use a mild liquid detergent. Use less than you think you need, because excess detergent stays in the fabric.
  6. Skip bleach and fabric softener. Softener can coat sports fabric and trap odor, and bleach can dull colors.
  7. Do not overload the drum. Garments need room to move, or they rub against each other.

What damages sublimated prints?

Sublimation sets dye into polyester fibers, which is why it does not peel or crack in normal use. The process is explained in our guide to what sublimation printing is. Because the dye sits in the fiber, the common causes of damage are the ones that wear the fiber or the color:

  • Hot washes and hot dryers. Heat is what moves the dye in the first place, so avoid repeated high heat.
  • Bleach and strong detergents. These can dull and streak colors.
  • Direct ironing. A hot iron on a printed area can mark the print and scorch polyester. Do not iron it unless the label allows, and then on the reverse side at the lowest setting.
  • Rough rubbing. Zips, abrasive towels and hook-and-loop strips wear fabric and cause pilling.
  • Long sun exposure. Leaving kit to dry for hours in strong sun can dull dark colors over time.
  • Mixing with new dark colors. Some dyes can bleed in early washes. Wash new, strongly colored items separately.

How should you dry and store kit?

Drying is where most kit gets hurt. Hang it on a line or lay it flat, in the shade or indoors. Polyester dries fast. If the care label permits tumble drying, use a low setting and take the kit out slightly damp.

Store it only when fully dry, folded or on a hanger, away from direct sun. Do not seal damp kit in a plastic bag. Mold and odor start in the bag, not in the wash.

How do you deal with sweat odor and stains?

Odor in polyester usually comes from sweat residue and bacteria held in the fabric. These steps help:

  • Wash soon after use, and do not leave kit wet in a sports bag.
  • Soak for 30 minutes in cool water first if the kit is badly soiled.
  • Use a sports-specific or mild detergent, with the correct dose.
  • Avoid fabric softener, which can hold smells.
  • Treat grass or mud stains with cool water and a gentle brush before washing. Never use hot water, which can set some stains.

If an odor does not go after several washes, repeat the cool wash with no softener and dry it fully before storing.

What about embroidery, heat transfers and numbers?

Decorations other than sublimation sit on the surface or are stitched in, and they need more care. Our guide to sublimation, screen printing and embroidery describes how the methods differ.

  • Heat transfers, DTF and screen-printed numbers. Wash inside out, cool, and air dry. Do not iron directly on them, and do not tumble dry hot, which can lift the edges.
  • Embroidery and badges. Wash inside out, in a gentle cycle, and avoid rough contact. Trim loose threads with scissors instead of pulling them.
  • Mixed kit. If a shirt has a sublimated body with a transfer number, wash it by the gentlest rule that applies to any part of it.

How do you hand this to players and parents?

Most kit is damaged in the family washing machine, not on the pitch. A short note handed out with the kit helps. Clubs and schools can copy this:

  • Wash inside out, cool, gentle cycle.
  • No bleach, no fabric softener.
  • Do not iron on the numbers, names or badges.
  • Hang to dry. Do not leave it damp in a bag.
  • Follow the care label on the garment.

If you manage a team, see how we help clubs and schools plan and order kit.

Common Questions

Can I put a sublimated jersey in the washing machine?

Usually yes, on a cool or warm gentle cycle, but check the garment's own care label first. Turn it inside out, wash it with similar colors and avoid heavy loads that rub the print.

Can I tumble dry team kit?

Air drying is the safer choice for polyester kit, especially with numbers, badges or transfers. If the care label allows tumble drying, use a low heat and remove the kit while it is still slightly damp.

Why does my polyester kit still smell after washing?

Sweat residue and bacteria can stay in the fabric if it was left damp in a bag. Wash it soon after use, avoid fabric softener, and dry it fully. A pre-soak in cool water before washing can help.

Do sublimated colors fade?

In sublimation the dye is bonded into polyester fibers rather than sitting on the surface as a layer, so under normal use it does not crack or peel. Colors can still dull over time with hot washes, bleach, harsh detergent and long sun exposure.

Get a Quote

Sources

This page is general care guidance for polyester and sublimated sportswear, not care instructions for any particular garment. Always follow the care label on the garment you own.

Planning an order?

Send your brief and we will reply with pricing and a sample timeline.

Sample 8–10 working daysBulk 15–18 working daysTeam kits from 15, other styles 20 per style per colorA quote is not an order