Nyxlete · free to use
Garment quality and sample inspection checklist
Before you start
Have these ready. The approved sample and your written specification are the standard you check against.
- Approved sample or reference garmentThe piece you said yes to, not a photo of it.
- Specification or tech packMeasurements, tolerances, fabric, labels, artwork placement.
- Roster or order listNames, numbers and sizes, if it is a team order.
- Soft tape and kitchen scalePlus a ruler and a white cloth.
- Daylight and a clear tableCheck color away from colored lighting.
- A camera or phonePhotograph anything you are unsure about.
Fabric
Handle it, hold it to the light, then compare it with the approved sample.
- Looks and feels like the approved sampleColor, handle, thickness and surface.
- Weight is close to the specificationRough check on a swatch or off-cut only: weight in grams divided by the area in square meters gives GSM. Small scales are imprecise, so agree a tolerance in writing.
- Opacity is acceptableHold a single layer to the light, then stretch it. Check light colors and shorts especially.
- Stretch recoversStretch and release. It should spring back without bagging or showing pale lines.
- No flaws on the surfaceHoles, snags, marks, thick or thin patches, or fuzzy pilling.
- Panels of one garment match each otherNo visible shade difference between front, back and sleeves.
Seams and construction
Turn the garment inside out as well. Neatness inside is usually a sign of care outside.
- Stitching is straight and evenNo skipped stitches, loose loops or uneven stitch length.
- Seams lie flatNo puckering or twisting, especially at side seams and shoulders.
- Stress points are secureArmholes, crotch, hem, neck and pocket corners. Pull seams gently; do not force them.
- Loose threads are trimmedInside and outside.
- Left and right matchSleeve lengths, leg lengths, collar and pocket positions.
- Neck opening goes over a headIt stretches and returns without popping stitches.
- Zips, drawcords and elastic workZips run smoothly and lock. Elastic is not twisted.
- Inside labels sit flatSewn straight and comfortable against the skin.
Prints, embroidery and transfers
Compare with the approved mock-up. Measure placement from a fixed point such as the neck seam.
- Placement matches the mock-upDistance from seams, centered, level and the right size.
- Print edges are crispNo blur, ghosting, cracking or white gaps at seams on all-over designs.
- Colors match the mock-up and approved sampleCheck in daylight.
- Embroidery is dense and flatNo puckering of the fabric around it. Backing is neat and soft inside.
- Transfers and vinyl are firmly bondedEdges lie flat. Stretch the fabric gently and check nothing lifts.
- Names and numbers are correctSpelling, number and position match the roster. Straight and centered.
Color and shrink tests at home
Use a spare piece if you have one, because washing changes the garment. Decide your acceptable limits before you test and agree them with the supplier.
Color check
- Compare with the approved sample in daylightLook at each color, and at different pieces side by side.
- Dry rub testRub a white cloth firmly over each dark or bright area. Note any color on the cloth.
- Damp rub testRepeat with a damp white cloth.
Wash and shrink test
- Measure before washingRecord chest width, body length and sleeve or inseam, flat and relaxed.
- Wash following the care labelAdd one white cloth to check for color bleed.
- Dry as the label says, then measure againShrinkage is (before minus after) divided by before, times 100.
- Check color, prints and stitching afterwardsFading, cracking, peeling, puckered seams, twisted legs.
| Measure (cm or in) | Before wash | After wash | Change |
|---|---|---|---|
| Chest width | |||
| Body length | |||
| Sleeve length or inseam |
Measurements against the specification
Lay the garment flat and relaxed. Use the same method as the specification and the same points every time. Check several pieces, including different sizes.
| Point of measure | Size | Specification | Tolerance agreed | Measured | OK? |
|---|---|---|---|---|---|
| Chest width | |||||
| Body length | |||||
| Shoulder width | |||||
| Sleeve length | |||||
| Waist (bottoms) | |||||
| Inseam (bottoms) | |||||
| Other: |
Need the method? See how to measure body and garment.
Labels, sizes and packing
Check the order against your list, not from memory.
- Sizes on labels match the roster or order listCount by size and by style. Note any missing or extra pieces.
- Labels and hangtags are as specifiedContent, placement and spelling.
- Each piece is clean and free of marksNo stains, glue marks or stray pins and needles.
- Folding and bagging are as specifiedIndividual bags, sets together, cartons marked clearly.
- Photos taken of the packed orderCartons, a sample of the contents and the labels.
If something is wrong
Act the same day while the facts are fresh.
- Stop and keep the pieces. Do not wash, alter or wear the affected items.
- Photograph the problem close up and from a distance, with a tape in the picture if it is a measurement.
- Record it: the style, size, how many pieces are affected, and which line of the specification or approved sample it breaks.
- Write to your supplier the same day with the photos and the record. Ask what they propose, and agree the fix in writing before more goods ship.
- Check the supplier's written returns and remake terms. They differ between suppliers.
For large orders, or if you cannot inspect yourself, a third-party inspector can check against your specification using an agreed sampling plan (often called AQL).
Result
- ApprovedEverything matches the specification and approved sample.
- Approved with changesList the changes the supplier must make before bulk or shipping.
- Not approvedGive the reasons and ask for a new sample or a remake.