Made to your design
Custom Rash Guard Manufacturer
Long and short sleeve rash guards for BJJ and grappling clubs, surf and swim schools, gyms and brands, printed edge to edge in your artwork and made in Sialkot.
Rash guards at a glance
- Minimum
- 20 per style per color · team sets from 15 kits
- Sample
- 8–10 working days
- Bulk
- 15–18 working days after approval
- Made in
- Sialkot, Pakistan
- Shipping
- Worldwide, quoted extra
A rash guard is a close-fitting stretch top, so the design is the product. Full sublimation lets artwork run across the whole garment, over seams and under the arms, without the cracking or stiffness a heavy print can leave on stretch fabric.
We make rash guards for martial arts and grappling clubs, water sports schools, fitness brands and teams. You send the artwork or a rough idea, we build a sample for approval, and bulk follows the approved sample.
What we can customize
- Long sleeve, short sleeve or sleeveless cuts
- All-over sublimation in unlimited colors
- Flatlock stitching and cuff or hem finishes to your preference
- Men, women and kids size ranges
- Your own neck labels, hang tags and packaging
What to send us
- Artwork or a reference image (any format is fine to start)
- Sport or use: grappling, surf, swim, gym
- Sizes and rough quantity per size
- Colors, ideally with Pantone references
- Where you want logos, names or sponsor marks
Artwork not final? A reference image or rough brief is enough to start. We reply with a written quote and a sample timeline, and no bulk production begins until you approve the sample.
Photos and video from our Sialkot production floor are on the portfolio. Before you write your brief, read how sublimation printing works.
Rash guard specifications at a glance
| Garment | Close-fitting stretch top, built to your size chart or a garment you already like |
|---|---|
| Decoration | All-over sublimation, which needs polyester or a high-polyester fabric |
| Fabric | Stretch knit; the exact fabric is shown and agreed on your sample before bulk |
| Seams and finishes | Stitch type, cuffs and hems are set at sample stage |
| Branding | Your own neck labels, hang tags and packaging |
| Order size | 20 pieces per style per color; team kits from one team set of 15 kits |
| Timing | Sample ready 8-10 working days once specs and artwork are approved and payment is received; bulk 15-18 working days after sample approval; shipping time is extra |
Artwork and fabric notes for sublimated rash guards
Sublimation dye turns to gas and bonds with polyester fibers, so it cannot lighten a dark fabric. The base cloth for a printed rash guard is white or light, and every dark area of your design is printed rather than dyed in. Plan the artwork with that in mind and the colors on the sample will be closer to the colors on your screen.
Screens and fabric never match exactly. Send Pantone references or a printed swatch if color accuracy matters, and judge the sample in daylight rather than on a monitor.
The pattern pieces are printed flat and then sewn, so a design that crosses a seam, for example from the chest onto the sleeve, only lines up if the panel layout is built for it. Tell us which graphics must meet at a seam and we check them on the sample. Stretch fabric also needs stretch-friendly stitching, otherwise the seam thread breaks or puckers when the garment is pulled on.
How to brief us for a rash guard order
- Say who wears it and where: a grappling mat, a surf lesson and a gym floor each suggest a different neckline and hem.
- Tell us whether it is worn alone or under another garment, since that changes how snug you want the cut.
- Mark on a sketch or screenshot where logos, names and sponsor marks sit, and which ones must not be cut by a seam.
- Give a size split by kids, women and men, or send your own size chart.
- List any matching pieces such as spats, shorts or tees so the artwork can carry across the set.
How ordering works
From brief to delivery
Can you print all-over designs on rash guards?
Yes. Sublimation prints the design into the fabric across the whole garment, so artwork can wrap around seams without a raised print layer. We confirm placement on a sample before bulk.
What is the minimum order for custom rash guards?
The minimum is 20 pieces per style per color. A club ordering one design in mixed sizes counts as one style.
Do you make kids and women-specific rash guards?
Yes. We grade rash guards across kids, women and men, and can work from your own size chart or a garment you already like.
Can you print a dark or black rash guard?
Yes, but the dark color is printed onto white or light fabric rather than dyed over a dark base. Sublimation dye cannot lighten a dark cloth, so we print the full design into the panels and confirm the depth of color on your sample.
Can each rash guard carry a different name?
Yes. Send the name list with your sizes and we confirm the method and placement with your quote. Names work best in a clear area such as the back of the neck or the sleeve, away from seams.
Can you make shorts or spats to match the rash guard?
Yes. Send the artwork for the whole set and we match colors and pattern across each piece. Each garment type is its own style for minimum order purposes, so give us the quantity for every piece in your quote request.
Can I order long and short sleeve on one design?
Yes, you can quote both. Sleeve length changes the pattern, so tell us the split between the two cuts and we confirm how the 20-piece minimum applies to each before you approve a sample.
Related
Related products
The full Outdoor, Adventure & Technical Clothing range
49 products
Boxing & MMA Apparel
MOQ 20 per style per color · sample 8–10 working days
Custom Compression Wear
MOQ 20 per style per color · sample 8–10 working days
Custom T-Shirts
MOQ 20 per style per color · sample 8–10 working days
Kids & Youth Sportswear
MOQ 20 per style per color · sample 8–10 working days
Request your quote
Send your product, quantity and artwork. We reply with a written quote and a sample timeline. Start with a single sample if you want to see the quality first.